TBB
Inverter + Batteripakke - Effekt 8000W - 2 MPPT indgange - Inverter, oplader og regulator - Batteri 14336Wh - Wi-Fi kommunikationsmodul
SKU: TBB-RIOSUN2-8KVA-1x-DY-POWERBRICK-14336
6.774.94 kr
Ekskl. moms
Levering 1-4 dage
På lager
Inverter + Batteripakke - Effekt 8000W - 2 MPPT indgange - Inverter, oplader og regulator - Batteri 14336Wh - Wi-Fi kommunikationsmodul
- TBB-RIOSUN2-8KVA-1x-DY-POWERBRICK-14336 sættet er en meget interessant hjemmelagringsløsning på grund af inverterens alsidighed og batteriets store kapacitet (14KWh). TBB's RioSun II inverter er en all-in-one enhed, der indeholder solregulator, inverter og batterilader, og er velegnet til en mangfoldighed af installationer såsom netforbundne (med og uden batterier), standalone, som AC kobling til at udvide eksisterende installationer og som backup ved strømafbrydelse
DY-POWERBRICK-14336 | |
| Brand | Dyness |
| Capacity | 14336Wh |
| Nominal capacity | 280 Ah |
| Battery type | LiFePO4 51.2V / 280Ah |
| Nominal voltage | 51.2 V |
| Recommended charging / discharging current | 140 A |
| Load current at full power | 150 A |
| Discharge current at full power | 200 A |
| Peak power charge/discharge current | 210 A |
| Life Cycle | Unlimited (10 years) |
| Nominal power | 7168 W |
| Maximum power | 10240 W |
| Maximum peak power | 10752 W (15 s) |
| Depth of discharge (DOD) | 95% |
| Recommended loading and unloading | 0.5C |
| Temp. Operation (load) | 0 - 55 ℃ |
| Temp. Operation (download) | -20 - 55 ℃ |
| Dimensions | 435(W) x 233(D) x 857(H) mm |
| Weight | 114 Kg |
| Protection | IP20 |
| Communication | CAN / RS485 |
| Expansion | Up to 50 units in parallel |
| Compatibility | SMA / Victron / Ingeteam / Delios / Goodwe / Solis / Deye / SAJ / Voltronic / Sungrow / TBB ... |
TBB-RIOSUN2-8KVA-S | |
| Brand | TBB |
| AC input voltage range | 175-265 Vac |
| Input frequency range | 45-65 Hz |
| Maximum AC input current | 50A |
| AC Out output current 1 | 50A |
| Output current AC Out 2 / Smart Port | 50A |
| Transfer time | 4 ms (15 ms in weak AC mode) |
| Protections included | Short circuit / Overload / Battery overvoltage / Battery undervoltage / Overtemperature / Solar panel overvoltage / Fan lock / Input voltage ripple too high |
| General purpose communication port | RS485 |
| Configurable relay | 30Vdc/3A or 250Vac/3A |
| Operating temperature range | -20ºC - +65ºC |
| Operating relative humidity | 95% no condensation |
| Maximum altitude | 2000m |
| Dimensions | 620 (H) x 320 (W) x 164 (D) mm |
| Net weight | 34Kg |
| Cooling | Forced |
| Protection rating | IP21 |
| Certifications | Security: EN-IEC 62477-1, EN-IEC 62109-1, EN-IEC 62109-2 EN-IEC [%VAR%] EMC: EN-IEC 61000-6-1, EN-IEC 61000-6-2, EN 61000-6-3, EN 61000-6-4, EN 61000-3-11, EN 61000-3-12 EN [%VAR%] Network: RD 1699 |
INVERTER | |
| Nominal battery voltage | 48V |
| DC input voltage range | 42-68 V |
| AC output voltage | Single-phase 220/230/240 Vac ± 2% |
| Output frequency | 50/60 Hz ± 0.1% |
| Harmonic Distortion | <2% |
| Factor de potencia de carga | 1 |
| Potencia de salida continua a 25ºC | 8000W 8000VA |
| Potencia pico de salida | 16000W |
| Eficiencia máxima | 95% |
| Consumo en modo de espera | 32W |
CARGADOR | |
| Tensión de absorción | 57.6V |
| Tensión de flotación | 55.2V |
| Tipo de baterías compatibles | Litio (recomendado) / AGM / GEL / OPzV / Plomo-carbono / Inundadas / Tracción |
| Corriente máxima de carga | 90A |
| Compensación de temperatura | Sí |
REGULADOR SOLAR MPPT | |
| Corriente de salida máxima | 100A |
| Número de MPPT | 2 |
| Tensión máxima de circuito abierto / MPPT | 250 Voc |
| Rango de tensión / MPPT | 65-245 Vcc |
| Corriente máxima de entrada / MPPT | 36A |
| Corriente máxima de cortocircuito / MPPT | 40A |
| Potencia FV máxima / MPPT | 4400W |
| Eficiencia máxima | 98% |
| Eficiencia MPPT | >99.5% |
| Protections included | Short circuit / Overload / Battery overvoltage / Battery undervoltage / Overtemperature / Overvoltage solar panels |
POSSIBILITIES THROUGH ACCESSORIES | |
| Surplus injection to the grid | Required TBB-E4-MONITOR and TBB-SDM-230 |
| Parallelization of inverters | TBB-E4-MONITOR Required |
| Three-phase connection | Necessary 3 investors and TBB-E4-MONITOR |
| AC coupling | TBB-E4-MONITOR Required |
| Three-phase operation without battery | Necessary 3 investors and TBB-E4-MONITOR |
- All-in-one inverter
- WiFi communication module
- Ground terminal
- User manual
- Installation material
- Battery
- Power and communication cables