- GV50CG er en entry-level, omkostningseffektiv 2G GNSS Cat1 LTE backup GNSS tracker. Ekstremt kompakt design til skjult installation. Dens kompakte størrelse og kraftfulde funktioner gør den til et ideelt valg til forskellige transport-overvågningsapplikationer, såsom køretøjsfinansiering, stjålne køretøjer, køretøjsleasing og logistik. • LTE Cat 1 med 2G backup • Indgangsspænding fra 9 til 90 V • Kompakt størrelse
| Brand | Qeclink |
| Model | GV50CG |
| Installation | Hidden under hood |
| Operating band | LTE FDD: B1/B2/B3/B4/B5/B7/B8/B20/B28 |
| LTE data transmission | LTE-FDD: Max 10Mbps (DL)/Max 5Mbps (UL) |
| Frequency | 850/900/1800/1900 MHz |
| GSM data transmission | EDGE: (DL)236,8 Kbps/(UL)236,8 Kbps GPRS: (DL)85,6 Kbps/(UL)85,6 Kbps |
| GNSS type | All-in-one GNSS receiver |
| Constellations supported | GPS,Beidou |
| Sensitivity | Cold start: -147dBm Hot start: -155 dBm Tracking: -160 dBm |
| Location Accuracy (CEP) | Autonomous: < 2m |
| First position (TTFF) - open field | Cold start: 28 seconds approx Hot start: 1 second approx |
| Dimensions | 76(LA) × 39(AN) × 16(AL) mm |
| Weight | 71.5g |
| Backup battery | Lithium Polymer, 190 mAh |
| Working voltage | 9V ~ 90V DC |
| Working temperature | -30℃ ~ +70℃ -40℃ ~ +80℃ for storage |
| Message buffer | Up to 10000 messages |
| Digital Inputs | A (1) positive trigger input for ignition detection |
| Configurable Inputs | One (1) input configurable for analog input (0 V ~ 16 V) or negative input |
| Interlocked Digital Output | One (1) digital output with internal latching circuit, open drain, maximum drive current of 150 mA |
| Cellular antenna | Internal only |
| GNSS Antenna | Internal only |
| LED indicators | CEL, GNSS |
| Micro USB interface | For configuration, updating and debugging |
| Transmission Protocol | TCP, UDP, SMS |
| Scheduled Report | Report position and status based on preset time intervals, distance, mileage or a combination of these settings |
| Geo-fence | Geo-fence and parking alarm, supports up to 20 regions |
| Speed alarm | Flexible speed monitoring, with abnormal speed alarm |
| Low Battery Alarm | Notifies alarm when battery is low |
| Trawl alarm | Trailer alarm in off state |
| Driver behavior | Detect aggressive driver behaviors, including hard braking, hard acceleration, etc. |
| Collision Detection | Collect crash data for reconstruction and analysis |
| Remote control | Digital output OTA control |
| SOS Alarm | Report of alarm message triggered by the emergency button |
| Virtual Ignition Detection | Based on voltage and accelerometer |
| Interference Detection | Alarm based on interference detection |
- Device only