Global LTE Cat M1/NB2 med 2G og enkelt antenne - Op til 7 års batterilevetid - Vandtæt iht. IP67 - Hurtig og fleksibel installation - Ideel til asset-overvågning og batch-styring

SKU: QL-GL530MG

900.00 kr

Ekskl. moms

Levering 1-4 dage

På lager

Global LTE Cat M1/NB2 med 2G og enkelt antenne - Op til 7 års batterilevetid - Vandtæt iht. IP67 - Hurtig og fleksibel installation - Ideel til asset-overvågning og batch-styring

Brand	Queclink
Model	GL530MG
Installation	Flexible
Operating band	LTE Cat M1/NB2 Cat M1: B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/ B27/B28/B66/B85 Cat NB2: B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/ B28/B66/B71/B85
LTE data transmission	eMTC (DL) 348kbps eMTC (UL) 1.08Mbps NB2 (DL) 121kbps NB2 (UL) 150kbps (UL) [%VAR%] NB1 (DL) 74.1kbps NB1 (UL) 101kbps (UL) [%VAR%]
Work frequency	EGPRS 850/900/1800/1900 MHz
EGPRS data transmission	GPRS 107 Kbps(DL)/ 85.6 Kbps(UL) EDGE 296 Kbps(DL)/ 236.8 Kbps(UL)
Dimensions	87 × 51 × 30mm 3.43’’(Largo) × 2.01’’(Ancho) × 1.18’’(Alto) 87 × 51 × 33.5mm 3.43’’(Largo) × 2.01’’(Ancho) × 1.32’’(Alto) (version for mounting in magnetic housing)
Weight	140 g 160 g (version for mounting in magnetic housing)
Backup battery	3 lithium batteries CR123A, 1 400 mAh
Duration	1 report up to date (GNSS activated): 5 years 1 report per day (cell ID only): 7 years
Watertightness	Conform IP67
Working temperature	-20℃ ~ +60℃
Internal temperature sensor	To control the temperature Accuracy: ±1℃
Internal light sensor	For tamper detection
Vibrator	For confirmation signal when pressing the function button
Magnetic Mounting Housing (Optional)	For easy installation on metal surfaces
GNSS type	U-box all-in-one GNSS receiver
Constellations	GPS, Glonass, Galileo, Beidou
GNSS sensitivity	Cold start: -148dBm Hot start: -160 dBm Tracking: -167 dBm
Location Accuracy (CEP)	Autonomous: < 2m
First position (TTFF) - open field	Cold start: 24s approx Hot start: 1s approx
Function button	Used for power on/off and operating status check
LTE Antenna	Internal only
GNSS Antenna	Internal only
LED indicators	GNSS, State
Commands	Queclink Protocol Commands
Transmission Protocol	TCP, UDP, SMS
Working Modes	Power saving mode for extended standby time Continuous mode for emergency tracking
Scheduled report	Position and status reporting at preset time intervals
Geo-fence	Supports up to 20 regions
Battery alarm	Alarm when internal battery power is low
Activation report	Report when the device is activated
Motion Detection	Motion detection based on internal accelerometer of 3 axes
Setting the Reporting Frequency	Intelligent adjustment of notification frequency