Analog fire alarm control panel of 2 loops - Capable of holding two batteries of 12V-12Ah. - Each loop supports 199 sensors and 99 modules - User interface with color graphic display - Automatic report writing - Communication with CMS
SKU: TF-TFA2-596
Ekskl. moms
Analog fire alarm control panel of 2 loops - Capable of holding two batteries of 12V-12Ah. - Each loop supports 199 sensors and 99 modules - User interface with color graphic display - Automatic report writing - Communication with CMS
Addressable fire detection control panel equipped with 2 detection loops, each loop can control 199 detectors and 99 modules, 2 serial buses RS485 for connecting expansion devices, up to 16 devices to choose from repeater panels and/or telecommunication devices.
The TFA2-596 control panel can be part of a network of Tecnofire control panels, manages 300 fire or technical detection zones and 100 virtual detection zones, 100 alert plans, 32 time slots, 200 formulas, cyclic test server and customizable or perpetual four-year calendar.
Advanced management with logic determined by the application of formulas, dynamically relating the functional states of the system devices.
Equipped with 4 specialized signaling outputs and 6 freely programmable signaling outputs.
TLC Section: iP communication, 4 channels: Local Server, Remote Server, Tecnoserver, Call back, 8 communicators for event notification, contact data 2 IP addresses for each communicator, 5 communication protocols, 15 categories of transmittable events.
User interface: color display of 4,3”, programming and management keyboard, 16 LED signaling, voice synthesis and multifunctional acoustic signal speaker.
USB port Serial printer management. CSR® system management: programming, remote management and control.
5A Modular Switching Power Supply. Battery compartment: 2 x 12V - 12Ah. Aluminum and steel cabinet.
Central office according to EN 54-2: 1997+ A1: 2006 - EN 54-4: 1997+ A1:2002 + A2:2006.
Approval certificate 0051-CPR-0389.
System compatibility IN 54-13:2020
- TECNOFIRE
- Analog fire detection control panel with 2 loops with capacity for up to 596 addressable points
- Fire-Speed Protocol
- Three-color TFT graphic display 482X272 pixels
- Communication with CMS IN 54.21
| Total detectors | 398 |
| Total manageable modules | 198 |
| Total manageable areas | 300 |
| Virtual zones | 100 |
| Specialized/programmable relays | 2/3 |
| Open Collector programmable | 3 |
| Controlled output for siren/Reset | 1/1 |
| True Color TFT Display | 480 x 272 pixels |
| Vocal synthesis | Multilingual dictionary |
| Detection loops | 2 |
| BUS serial RS485 | 1 - Master BUS + 1-Slave BUS |
| Event memory capacity | 4096 |
| Access levels | 4 |
| Access codes | 10 |
| Supervised system mode | Programmable |
| Detection loop | Fire-speed |
| BUS RS485 | Fire-Bus |
| Formulas | 200 |
| Alarm plans | 100 |
| Time bands | 32 |
| Calendar years | 4 (programmable) |
| Expansion BUS connection RS485 Maximum 15 units | Central repeater ,Synoptic repeater, Telephone combiner |
| Serial printer | Management |
| CPU Consumption | 200mA @ 24V d |
| Electrical Outputs | Max. 50mA |
| Supply voltage Loop | 20V...27,6VDC |
| BUS supply voltage RS485 | 20V...27,6VDC |
| Supply voltage sirens | 20V...27,6VDC |
| Modular power supply | Type A (switching) |
| Supply voltage | 230V AC +10 -15% 50Hz |
| Maximum absorbed current | 700mA ac |
| Nominal values | 5A @ 27,6V dc |
| Maximum supply current | I max. 5A |
| Ripple max | ≤150mV pp |
| Battery protection | T-1,6A Fuse |
| Battery flammability class | V-2 or higher |
| Internal battery resistance | max. 1,5 Ω |
| Battery deactivation voltage | Per Vbat <17,6V |
| Tiempo de recarga batería (2 x 12V/7Ah) | 100% en 24 horas |
| Clase medioambiental | 3K5 EN 60721-3-3:1995 |
| Temperatura de ejercicio | +5° C... +40° C |
| Humedad relativava | 10%...93% (en ausencia de condensación) |
| Alojamiento batería | 2 x 12V/12Ah |
| Grado de protección | IP30 |
| Contenedor | Aluminio - Metal |
| Dimensiones (L x A x P) | 441 x 347 x 149mm |
| Peso (sin batería) | 6,2Kg |
| Interfaz ethernet | Estándar 803.2 |
| Vector | IP |
| Canales de comunicación | Local Server, Remote Server, Tecnoserver, Call back |
| Comunicadores | 8 |
| Direcciones IP | 16 (2 para comunicador) |
| Sucesos transmisibles | 13 (categorías) |
| Protocolos de comunicación | 5 |
| Criptografía | AES 128 bit |
| Lista de eventos | 64 elementos |
| Certificación Central | EN 54-2: 1997+A1:2006 |
| Certificación Fuente de alimentación | EN 54-4: 1997+A2:2006 |
| Certificación Número de certificación | 0051-CPR-0444 |
| Certificación Año del marcado CE | 14 |
| Certificación Número de la declaración | 015_TFA1-298 |
| Organismo de certificación | IMQ |
- Central de incendios analógica de 2 lazo