PoE biometric access controller - Fingerprint, card, QR or PIN access - TCP/IP | Connection to slave controller - 4 readers by Wiegand | 8 readers by OSDP - Relay output for 4 doors - Embedded ATLAS Series software and mobile app

An access controller is a professional element for the protection of perimeters and gates. They are located in safe and hidden places, allowing the connection of the readers, which are placed in the visible place of the installation and identify the user who wants to access, as well as the connection to the electronic locks, which will be activated if the user is allowed access.

This controller supports readers based on the Wiegand protocol, which allows the connection through direct wiring of each reader to the controller. It has 4 readers to perform entry and exit at each door and supports biometric readers, which are connected through RS485 and allow connection through BUS (cascading). By supporting RS485, it also supports OSDP on the same connector, the latter being customizable in the configuration and allowing up to 8 readers by this method.

The controllers allow to manage several doors simultaneously by means of several relay outputs. This model has 4 relay outputs, being configurable as dry contact (without voltage).

By using an access controller, it is possible to ensure certain functions, such as opening all doors when a fire signal is received or triggering an alarm when a forced door is detected. Thanks to its inputs and outputs, it is possible to manage these functions in a simpler way.

Advanced configurable functions: anti-pass-back technology (does not allow a person to pass through if he/she is already inside).

The ATLAS Series embedded software is used to configure users, schedules and access groups, as well as special functions, relay opening times or reader reading times.

• ZKTeco
• Biometric access control panel
• Management of 4 doors
• Capacity 5.000 users and 10.000 records
• Supports up to 4 Wiegand readers and 8 RS485/OSDP (V2.1.7) readers (card or fingerprint reader)
• TCP/IP communication, Wiegand and RS485
• Standard PoE power supply
• Input of 4 pushbuttons, 4 door sensors and 2 auxiliary inputs
• 4 relay and 1 auxiliary outputs
• Relay configuration NO/NC
• Integrated ATLAS Series software
• Web browser access to software for access control management and reports
• ZK ATLAS mobile app for remote management of users, events, alarms and open remotely
• Connection of ATLAS slave controllers with access from a single IP to 84 gates
• Free license up to 25 gates

• ZKTeco Access Controller
• Mounting material
• User instructions